| Customization: | Available |
|---|---|
| Transparency: | Transparent |
| Layered: | Basic Level |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PVC Film for ID Card Printing Card Protective Film
Item No.F-022/F-019
1. Product introduction:
Laminated card-making special PVC tape F-022/F-019,
In the card making process, it can be directly used for bonding with offset printing or screen printing UV ink, which can produce the same bonding effect as the laminating oil process. The adhesive film has good adhesion fastness to ink, no discoloration or deformation during lamination, excellent aging performance, and a wide range of uses.
2. How to use:
Laminates directly with offset or silkscreen UV ink prints
3.Technical features:
l Suitable for lamination of pearlescent inks, silk-screen gold and silver bases and dark inks, with high lamination strength
l Can maintain the clarity of fluorescent anti-counterfeiting labels
l No adhesion between films, suitable for mounting magnetic strips
l Wear-resistant, effectively prolong the life of the card
l The card making process is environmentally friendly, without solvent and exhaust emissions
4.Technical parameter:
|
Item |
Indicator |
|
|
Vicat softening temperature(ºC) |
74±2 |
|
|
Heat shrinkage rate |
MD |
≥-32% |
|
TD |
≤7% |
|
|
tensile strength (MPa) |
MD |
≥45 |
|
TD |
≥40 |
|
|
Roughness (no glue surface) (μ m) |
Ra |
0.7~1.5 |
|
Rz |
3~9 |
|
|
Thickness specification (mm) |
0.04~0.08 |
|
5.Lamination process:
|
product category |
F-022 |
F-019 |
|||
|
Scope of application |
Membership card, shopping card, consumption card, etc. |
Bank card, shopping card, etc. |
|||
|
Recommended Lamination Process |
l Lamination conditions |
hot-pressing |
cold pressing |
hot-pressing |
cold pressing |
|
l Temperature (ºC) |
120~160 |
≤25 |
145~165 |
≤25 |
|
|
l Time (min) |
25 |
15 |
25 |
15 |
|
|
l Pressure l (MPa) |
≥5 |
≥5 |
≥5 |
≥5 |
|
6.Packing :
Inner packing: polyethylene film
7. Storage conditions and shelf life:
Sealed and moisture-proof, the product must be stored indoors, the stacking height should not exceed 1 meter, and the ambient temperature should be 5°C to 30°C. Shelf life is two years under normal storage conditions.
8.Precautions:
1. The product is placed horizontally to avoid direct sunlight and heavy pressure; 2. Take it as you use it, keep it sealed, and use it up as soon as possible after opening.
! The information in this article is synthesized according to the actual production and test results, but whether the product fully meets the requirements of your factory depends on the specific application and process conditions. We recommend that users conduct tests before batch use, and this description cannot be used as a product quality guarantee.
){kind=link}